Temperature Alarm - Weinberger 40715 Bedienungsanleitung

TEMPERATURE ALARM

• You can define a temperature range for the weather station to output an alarm if that range is
exceeded.
• The default settings ex works are a minimum value of -50 °C and a maximum value of +70 °C. If
the measured temperature drops below -50 °C or rises above 70 °C, the alarm will be activated.
Setting the temperature alarm
In normal time display mode, press the ALERT button (B2) for several seconds until the lower
1.
threshold value begins flashing. Press the UP (B5) or DOWN/MEM (B6) buttons to set the value.
Press the ALERT button (B2) to confirm the setting and to go to the upper threshold value.
2. The upper threshold value begins flashing. Press the UP (B5) or DOWN/MEM (B6) buttons to set
the value. Confirm your setting by pressing the ALERT (B2) button. Setup is now complete.
Please note:
• If previously deactivated, setting the temperature alarm does NOT automatically activate it.
Activating / deactivating the temperature alarm
• In normal time display mode, press the ALERT button (B2) to activate / deactivate the
temperature alarm. The temperature alarm icon (A8) lights up if the temperature alarm is active.
40715-Mebus-IM-INT-V04.indb 75
75
1/3/2018 3:31 PM