Siemens SIMATIC IFP2200 MT Produktinformation Seite 13

The devices fulfil the general and safety-related requirements of the following regulations and related amendments and
comply with the designated British standards (BS) published in the official consolidated list of the British Government.
• Electromagnetic Compatibility Regulations 2016 (EMC)
• Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016 (Explosion
Protection)
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
(RoHS)
• The Ecodesign for Energy-Related Products and Energy Information Regulations 2021, Chapter 7 Electronic Displays
UK Declarations of Conformity
The UK Declarations of Conformity are available to the relevant authorities at the following address:
Siemens AG
Digital Industries
Factory Automation
DI FA HMI
Breslauer Str. 5
DE-90766 Fürth, Germany
The Declaration of Conformity and other certificates are also available at the following Internet address: SIMATIC certificates
(https://support.industry.siemens.com/cs/ww/en/ps/cert). Enter the article number in the "Product" field.
ATEX/UKEX/IECEx approval
Notes on use in hazardous areas
Observe the following FAQ regarding the use of an HMI device in hazardous areas: ATEX-FAQ
(https://support.industry.siemens.com/cs/ww/en/view/291285)
When using the device in hazardous areas, ensure that all plugs connected to the device are secured in a captive manner, see
section "Securing cables for use in hazardous areas (Page 11)".
You can find more information about explosion protection, EC/EU declarations of conformity and other certificates on the
Internet at the following address:
Certificates for Flat Panels (https://support.industry.siemens.com/cs/ww/en/ps/24423/cert)
ATEX/UKEX approval
For an HMI device with "Ex" marking, the following approvals apply according to the following standards.
• Standards:
EN IEC 60079-0:2018
–
EN IEC 60079-7:2015 +A1:2018
–
EN 60079-31:2014
–
• Approvals:
II 3 G
II 3 D
IECEx approval
For an HMI device with "IECEx" marking, the following approvals apply according to the following standards.
• Standards:
IEC 60079-0:2017
–
IEC 60079-7:2017
–
IEC 60079-31:2013
–
• Approvals:
SIMATIC IFP2200 MT
A5E37770549-AG, 08/2022
Ex ec IIC T4 Gc
Ex tc IIIC Dc
Ex ec IIC T4 Gc
Ex tc IIIC Dc
13