Resetting The Configurator Functions; Document History - Vokkero GUARDIAN EUROPE - Standard Bedienhinweise

VOKKERO GUARDIAN EUROPE Standard | Plus | Atex | User Guide V4.0
3 - Locking
Allows you to block access to the configurator using a PIN code.
In Lock mode, only the «Quick Config" option is available. You can only access the other settings after validating the PIN code.
Note: The PIN code consists of 1 to 6 digits
Once the lock has been activated, the PIN code can be modified or deactivated (see screen below showing the options available in the
«Lock» menu, once the lock has been activated).
EN

4.4. Resetting the configurator functions

In order to put the configurator back in factory mode (and thus cancel all the configuration changes made previously), do the following:
1. Unplug the configurator
2. Reconnect the configurator
3. When the configurator is switched on, on the first home screen, consisting of the «VOKKERO®» logo: press the 2nd «O" of
VOKKERO®.
4. Then you can restore the default settings of the configurato
5. Confirm
6. The configurator parameters have been reset.

DOCUMENT HISTORY

Version
V1.0
V2.0
V3.0
V4.0
Contents
Creation
New product version
General update
Product integration GUARDIAN ATEX
66 / 128