Settings - Vokkero GUARDIAN EUROPE - Standard Bedienhinweise

VOKKERO GUARDIAN EUROPE Standard | Plus | Atex | User Guide V4.0
PAIRING GUARDIAN ATEX WITH GUARDIAN STANDARD OR GUARDIAN PLUS
By default, the GUARDIAN ATEX terminals (ARF8158) embeds a 16Khz audio quality and therefore communicate with terminals having the
same configuration (GUARDIAN ATEX or GUARDIAN PLUS ARF8154 / 8156).
GUARDIAN ATEX terminals can also communicate with GUARDIAN Standard (ARF8150 / 8152). A «quick configuration» from the configurator
is required to reconfigure all GUARDIAN ATEX terminals in communication with GUARDIAN Standard terminals.
It should be noted that the audio quality of GUARDIAN ATEX terminals changes to Standard quality (8Khz) as soon as they are paired with
GUARDIAN Standard terminals.
In the presence of GUARDIAN Standard on the configurator at the time of the «quick configuration», the GUARDIAN ATEX terminals will take
the Standard audio mode (8Khz).
Note, it is not possible to pair the three types of terminals at once: GUARDIAN Standard, GUARDIAN PLUS and GUARDIAN ATEX. GUARDIAN
Standard and GUARDIAN Plus do not communicate together.
Encryption type: Fixed key or No encryption
If you want to add a GUARDIAN ATEX to an existing conference containing GUARDIAN ATEX and GUARDIAN Standard, it is mandatory to bring
back at least one GUARDIAN Standard on the configurator and redo a «quick configuration» with the GUARDIAN ATEX.
If you want to add a GUARDIAN Standard to an existing conference consisting only of GUARDIAN ATEX terminals, it is mandatory to bring back
all GUARDIAN ATEX to the configurator and redo a «quick configuration» with the GUARDIAN Standard.
Encryption type: New key at each config.
In any case, it is necessary to bring back all the terminals that you want to pair on the configurator for a new «quick configuration».

4.3. Settings

This menu enables a more detailed configuration of the system in order to configure the terminals,
the system or the configurator.
In "Devices", you can change the name of your terminal as well as the operation of the "Call" button,
the «Alarm» mode, set the Voice sensitivity mode or reset your terminals to the factory configuration.
In "Systems", you can change the system language, change the radio operation of the products,
activate the multi-master mode, update the terminal and the configurator's software, and change
the encryption mode.
In Configurator, you can calibrate the touchscreen and lock the access to the configurator.
The details for each element are given below.
EN
55 / 128