Introduction; System Installation Procedure - Vokkero GUARDIAN EUROPE - Standard Bedienhinweise

VOKKERO GUARDIAN EUROPE Standard | Plus | Atex | User Guide V4.0

INTRODUCTION

The operations described below allow you to rapidly and easily implement your VOKKERO Guardian communication sys-tem.
All the operations described are valid for all the VOKKERO® Guardian terminals listed below:
VOKKERO GUARDIAN EUROPE - Standard : VO8150AA / VO8152AA
VOKKERO GUARDIAN EUROPE - Plus : VO8154AA / VO8156AA
Note: Your product reference is given on the label on the back of the terminal housing.
The VOKKERO Guardian system is ready-to-use; it comprises the following three main elements:
EN
• Terminals
• Configurator/Charger: VOKKERO GUARDIAN - Configurator : VO8118AA
• (Optional) Charger extension (1 to 4 maximum): VOKKERO GUARDIAN - Charger : VO8139AA
All the operating settings of the VOKKERO Guardian system are managed by the configurator which gives access to the Settings menu via a
touchscreen. The configurator must be connected to the power unit (otherwise it will not work) and up to 4 extensions can be associated with
the configurator.

1. SYSTEM INSTALLATION PROCEDURE

• Connect the power unit to the end charger (if several are connected in a row).
• Connect the power unit to the mains.
• Connect the VOKKERO Guardian terminals as shown below.
Note 1: the order and position of the terminals on the charger(s) are irrelevant.
Note 2: if the purpose of the operation is solely to charge terminals, then the configurator is not required.
The first configurator slot (i.e., closest to the LCD) is of importance to the system-configuration process; for more details, refer to §3.2.
Vokkero®
Guardian Terminal
Vokkero® Guardian extension
VO8139AA
Vokkero® Guardian configurator
VO8118AA
44 / 128