Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Warranty Disclaimer - HELIX DSP PRO MK3 Bedienungsanleitung

High-res 10-kanal dsp
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Technical Data

Inputs ........................................................................... 8 x RCA / Cinch
Input sensitivity ............................................................ RCA / Cinch: 2 / 3 / 4 Volts
Outputs ........................................................................ 10 x RCA / Cinch
Output voltage ............................................................. 8 Volts
Frequency response .................................................... 10 Hz - 44,000 Hz
DSP resolution ............................................................. 64 Bit
DSP power .................................................................. 2 x 295 MHz (2.4 billion MAC operations/sec.)
Sampling rate .............................................................. 96 kHz
DSP type ..................................................................... 2 x Audio signal processor
Signal converters ......................................................... A/D: AKM Velvet Sound 32 Bit
Signal-to-noise ratio (A-weighted) ............................... Digital input: 116 dB
Total harmonic distortion (THD+N) .............................. Digital input: < 0.0005 %
IM distortion (IMD) ....................................................... Digital input: < 0.002 %
Crosstalk...................................................................... > 90 dB
Operating voltage ........................................................ 9.6 - 18 Volts (max. 5 sec. down to 6 Volts)
Power rating ................................................................ DC 12 V
Current draw ................................................................ 650 mA
Max. remote output current ......................................... 500 mA
Additional features ....................................................... HEC slot, Ground lift switch,
Dimensions (H x W x D) .............................................. 40 x 177 x 150 mm / 1.58 x 6.97 x 5.91"

Warranty Disclaimer

The warranty service is based on the statutory
regulations. Defects and damage caused by over-
load or improper handling are excluded from the
warranty service. Any return can only take place
following prior consultation, in the original packag-
ing together with a detailed description of the error
and a valid proof of purchase.
Note: "The Bluetooth
®
Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners."
30
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
8 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Coax SPDIF (12 - 192 kHz)
1 x Remote In
Highlevel:
4 / 7 / 11 Volts or 12 / 22 / 32 Volts
1 x Remote Out
D/A: AKM Velvet Sound 32 Bit
Analog input: 111 dB
Analog input: < 0.001 %
Analog input: < 0.004 %
3 A max.
Smart Control Port, 32 Bit CoProcessor,
ADEP.3 circuit, Auto Remote switch
Technical modifications, misprints and errors ex-
cepted! We accept no liability for damage to the
vehicle or device defects caused by the incorrect
operation of the device. This product has been is-
sued a CE marking. This means that the device is
certified for use in vehicles within the European
Union (EU).

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis