Haspo 180 Montageanleitung Seite 17

7. Assembly of the net
The net is not part of the delivery.
Make sure that the groove of the goal is clean and all packing material or other material
is removed so that the assembly is possible without any problems.
Now fix and adjust the net rope in the groove. Then stick net holders with its clips into
the groove and fix them with a 90° rotation. Fixing is either possible manually, with the
key for hexagon socket screws or with a pliers (see bottom pictures). Distribute net
holders equally (same distances).
We recommend the following distribution of net holders:
Use all the other included net holders for the door corners and other connections
Lead the tensioning cord through each mesh of the net and tie it outside on both net
hoops, if necessary lead it through the bore in the net hoop.
Dismantling of the net is also done by rotation of the net holders through 90 degrees.
:
Crossbar : 13 pieces
Uprights : 10 pieces each
17