Haspo 180 Montageanleitung Seite 14

e) Assembly of net hoop braces:
Adjust round shaped plate of brace and hole of net hoop and stick from the goal's
inside 1 socket head cap screw DIN 912, M6. Add from the outside 1 washer DIN
9021, Ø 7.4 x 22mm and screw 1 cap nut DIN 986, M6 (see 1st bottom picture). To
fix net hoop brace at the crossbar push nut already mounted in point b) below the hole
of the welded plate. Fix brace slightly with 1 socket head cap screw DIN 912, M6 x 20
mm and 1 washer DIN 9021, Ø 7.4 x 22mm (see 2nd bottom picture). Finally tighten
all screws.
14