Haspo 180 Montageanleitung Seite 15

5. Installation of ground sockets and erection of the goal:
a) Prepare a level surface for the installation of the ground sockets. Take care that the ground
sockets are later fixed in the sand up to the top edge.
Place ground sockets (1x right, 1 x left) on the ground with open ends of feet facing to
the upright's inside and to the back.
Push into each open end profiles or squared timbers (80x80mm, lenght at least
1000mm) to prevent tilting. Attention: They are not included in the scope of
delivery!
b) Erect the goal and insert it into the ground sockets. Then fill sand up to the top edge of of
ground sockets.
c) The goals can always be taken out of the ground sockets. Close open ground sockets
with the caps.
Top view installation drawing:
15