Haspo 180 Montageanleitung Seite 13

d) Assembly of net hoops:
Set net hoops on the corners of crossbar/upright construction. Adjust welded fixing
plates with grooves pointing to the inside and to the bottom (consider left and right
side). Now push at the top already mounted nuts below the grooved plates and at the
bottom below the holes of the welded plates (see 1st to 4th bottom pictures). To fix
each net hoop stick 3 washers DIN 9021, Ø 7.4 x 22mm on 3 hexagon socket screws
DIN 912, M6 x 20mm and screw them into the nuts below the fixing plates (see 5th to
6th bottom pictures).
13