Wiring; Wiring Diagram; Maintenance & Repairing - Cosmo Rv Serie Benutzerhandbuch

14

3. WIRING

WIRING
The wires connection please refer to wiring diagram
inside the junction box, and rating label on the fan,
suggest using double pole fully disconnection switch
(contact gap min.3mm), besides a secured, strong
earthing is mandatory. And the wire layout should be
according to local wiring rules, the minimum require-
ment of wire: 3G 1.5mm 2.

WIRING DIAGRAM

4. MAINTENANCE & REPAIRING
MAINTENANCE & REPAIRING
Annual maintenance is necessary to ensure the
fan working properly.
Please make sure the electrical power is cutoff
before disinstallation
Please use clean water, or neutral detergent to
wipe up the surface of appliance, and blade, (no
gasoline or benzene detergent).
Make sure it had been dried already before rein-
stallation.