Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Range of application
The E51 thermostat can be used to control floor heating systems such as electric heating mats or heating foils, as well as for NC control valves (normally closed)
for water-guided floor heating systems. Via the weekly programme, the thermostat ensures that the desired temperature is available at the desired time.
Important Notes
•
We recommend leaving the installation of the temperature controller and the heating system to specialists.
•
Only qualified electricians should carry out the electrical connections and the mains connection of the appliance.
•
Disconnect the cables from the power supply before installing, checking or replacing a thermostat.
•
The wiring diagram and installation instructions for the unit can be found in this manual.
•
The manufacturer's warranty does not cover malfunctions of the appliance that occur as a result of mechanical damage, faulty installation, improper
handling and use for purposes or under conditions not specified in these instructions for installation and use.
Control and settings
Functional description:
•
MODE „Antifreeze"
If you do not use the room for a long time in winter, it is recommended to activate the "Frost protection" mode to avoid building damage.
•
MODE „Hold temperature"
The thermostat maintains the temperature set for the room. Do not set the floor temperature higher than the maximum temperature specified by
the floor covering manufacturer.
•
MODE „Program"
The thermostat maintains the temperature set for the room. Do not set the floor temperature higher than the maximum temperature specified by
the floor covering manufacturer.
USER MANUAL
Display layout
Function symbols
Other
Mi-Heat Heizsysteme GmbH
Ol Streek 39a | 26607 Aurich | Germany
Tel.: +49 (0)4941-6971930 | Web: mi-heat.com | Mail: info@infrarot-fussboden.de
Page 12-24
Events
8
Werbung
