Noise/Vibration Information - Bosch Indego S 500 Originalbetriebsanleitung

Robotic Lawnmower
Switzerland
United Kingdom
Rest of Europe
Input voltage (AC)
Protection class
Frequency
Output voltage (DC)
Protection type
Weight
A) Depends on cutting height, grass conditions and moisture
B) Internal battery temperature

Noise/Vibration Information

Noise emission values determined according to
EN 50636-2-107.
Typically the A-weighted noise levels of the product are:
Sound power level 59 dB(A).
Explanation of Figures
Action
Accessories
Delivery scope/unpacking the mower B
Laying out perimeter wire
Extending perimeter wire
Laying perimeter wire around new in-
ner object
Lifting up and carrying the mower
Setting the height of cut
SpotMow
Cleaning
Maintenance
Adding a further lawn area
– with additional docking station
(right)
– without additional docking station
(top left)
Replacing the battery
Software update
Power supply unit connection
Installation
With the following QR code, you can view a video on how to
install the mower under www.bosch-diy.com/indego-help.
Alternatively, follow the Installation Guide delivered with the
product.
Bosch Power Tools
SI Indego S 500 Indego S+ 500
Unit
F 016 L90 934 F 016 L90 934
F 016 L90 935 F 016 L90 935
F 016 L90 916 F 016 L90 916
V 220-240
/ II
Hz 50-60
V 24
IPX7
kg 1.25
Figure Page
A 282
Remove stones, loose pieces of wood, wire, live mains
283
cables and other foreign objects from the cutting area.
C 283
Make sure that the cutting area is even and has no ditches,
284
D
grooves and steep slopes above 15°/27 % that are clear ob-
E 284 structions for the mower.
The docking station must be positioned on the wire at an
outer edge of the cutting area. It may not be positioned on
F 285
the side of a tool or garden shed standing as an island within
G 285
the lawn to be mowed.
H 286
It is recommended that you mow your lawn once with a con-
I 286
ventional lawnmower before installing and before the first
mowing of the new season and whenever the grass clippings
J 287
would be longer than 5 mm.
K 287
The mower's cutting system is designed to cut small lengths
of grass (30–50 mm). The clippings can remain as mulch to
fertilize the lawn. The height of cut for mower can be adjus-
ted to 30, 40 and 50 mm.
It is recommended to start with a higher setting and then
gradually decrease the height of cut as the wire disappears
L 288
under the grass. This prevents your Indego from cutting the
M 289−290
wire.
N 291
Additional perimeter wire can be added using a wire con-
nector (see figures D–E).
The perimeter wire can be extended up to a maximum length
of 350 m.
The perimeter wire can be buried up to 5 cm under the
ground (or under non-metallic slabs).
To avoid causing damage to the perimeter wire, do not verti-
cut or rake the area where it is positioned.
Indego M 700 Indego M+ 700
F 016 L90 934
F 016 L90 935
F 016 L90 916
220-240 220-240
/ II / II
50-60 50-60
24 24
IPX7 IPX7
1.25 1.25
Check if the perimeter wire is fully pegged to
the ground avoiding any slack lengths of wire.
Any loose wire can be a trip hazard.
F 016 L94 038 | (06.10.2022)
English | 21
F 016 L90 934
F 016 L90 935
F 016 L90 916
220-240
/ II
50-60
24
IPX7
1.25