Herunterladen Inhalt Inhalt Diese Seite drucken

Getting Started; Install Batteries - Levenhuk Atom Digital DNB100 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
Levenhuk Atom Digital DNB100 Night Vision Binoculars
EN
Never, under any circumstances, look directly at the Sun, another bright source of light, or at a laser through this
device, as it may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS.
Specifications
Magnification, x
Objective lens diameter, mm
Field of view, °
Close focus, m / ft
Observation distance, m / ft
Tripod adapter thread
Operating temperature range, °C / °F
IR-illumination
IR wavelength, nm
Recording time with illumination (IR), h
Recording time without illumination (IR), h
Daytime recording without IR
Recording at night (in the dark) with IR
Power supply
Storage
Screen
Language settings
Image format and resolution
Video format and resolution
Dimensions, mm / in
Weight, g / lb
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Getting started

Install batteries

Open the battery compartment cover and insert 6 AA batteries according to the correct polarity marks. Close the cover.
Charging the device
Connect the power cable to the device and the DC adapter (not included) via a USB plug and connect it to the AC power supply.
Attention! The device operates from the AC power supply, as the voltage of the computer's USB port is insufficient for the proper
operation of the device.
Installing/removing the memory card
The device supports memory cards class 10 up to 128GB.
Insert the microSD card into the slot. Make sure the direction is right. Do not force the card in.
Format the microSD card before starting, as it will improve its compatibility with the device.
To remove the card from the slot, press the edge of the memory card in gently, and the card will pop out. Then, remove the card.
Note: If the memory card is not installed, a No Card icon will be displayed.
POWER button
Press and hold the POWER button for 3 seconds to turn the device on or off.
Turn the focusing wheel to adjust the focus.
Notes:
If the device fails to activate, check for defective or improperly installed batteries. Always only use the recommended batteries.
If you wear glasses, keep them on while using the device.
1–5 (digital), 4 (optical)
24
10
5 / 16.4
250–300 (in complete darkness)
3–1000 (in weak light) /
820–984 (in complete darkness)
9.8–3280 (in weak light)
1/4"
−20...+60 (operating), −30...+70 (storage) /
–4...+140 (operating), −22...+158 (storage)
IR LEDs 3W
850
6
10
color image
black and white image
6 AA batteries
class 10, microSD up to 128GB
2.7", 320x240px
Chinese, English, French, German, Italian, Japanese, Korean,
Portuguese, Russian, Spanish
JPG; 10M/8M/5M/3M/VGA
AVI; 1920x1080px @30fps, 1280x720px @30fps
195x134x64 / 7.6x5.3x2.5
570 / 1.25
3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

81701

Inhaltsverzeichnis