Technical Data - Weidmuller PV Next-Serie Bedienungsanleitung

3.3 Technical data

General data
MPPT suitable for connection
String inputs per MPPT
Outputs per MPPT
Permissible ambient temperature in operation
Relative humidity in operation
Permissible ambient temperature for storage and transport
Relative humidity for storage and transport
Permissible height above sea level
Pollution degree within the box
Enclosure
Enclosure base part
Enclosure cover
Weight
Enclosure mounting
Degree of protection according to IEC 60529
Seal material
Impact resistance
Flammability rating according to UL 94
Connections AC control
PCB terminal blocks -XD10, -XD11, -XD12
PCB terminal blocks -XD10, -XD11, -XD12, stripping length
Connections DC-PV
PV string cables
DC PCB terminal blocks string input
DC PCB terminal blocks string input, stripping length
Electrical data AC control
Voltage range
Rated voltage
Rated current
Charging current
Motor inrush current
Potential-free contact X3 (-XD11)
Temperature for automatic shutdown
Electrical data DC-PV
Maximum input voltage Un
Maximum current PV connector (WM4 C) per MPPT
Maximum current cable glands per MPPT
Standards
Please refer to the data sheet enclosed with
the product.
2858290000/00/04.2022
1 or 2
2
1
-20 ºC ... +50 ºC, see type label
max. 90%
-40 ºC ... +85 ºC
max. 50%
3000 m
2
Glass fibre reinforced polycarbonate
Polycarbonate
CG: 2,508 g, WM4 C: 2,568 g
Wall mounting
IP65, No direct sunlight
Polyurethane
IK08 (IEC 62208)
V-2
0.25 mm² ... 1.5 mm² with/without wire-end ferrule
10 mm ± 1 mm
PUSH IN, WM4 C 4 ... 6 mm²
2.5 mm² to 16 mm² solid, stranded, with/without wire-end ferrule
18 mm ± 1 mm
100 ... 240 V AC
230 V AC
30 mA
approx. 100 mA
max. 300 mA
24 V DC / max. 300 mA
100 °C
1100 V DC
1 IN: 35 A, 2 IN: 2 x 17.5 A
1 IN: 50 A, 2 IN: 2 x 25 A
EN 50539-11:2015, EN 50539-12:2014, IEC 61439-2:2021-10
Product description
31