CAMPAGNOLA P8 Gebrauchs- Und Wartungsanleitung Seite 35

6 - MAINTENANCE
The distance between the chain teeth is ¼". Therefore, use a file with a 4 mm diameter and a flat one.
• Always sharpen the file from the inner part of the cutting side towards the outer part, keeping a 35° inclination.
• After the sharpening operation, all the teeth must have the same size (length and width).
Keep the
angle
File in the indicated direction
Put the depth calliper in stable position on the drive chain, so that the depth marker protrudes.
File its protruding part till it reaches the same level as the depth calliper.
Round the front angle of the depth marker off.
Depth calliper
Upper angle
of the plate
30°
35°
Side angle
of the plate
85°
10°
10° grip
File till it is as flat as
the depth calliper
Cutting angle of the upper
side of the plate
1
5
When filing, keep a space which is
1/5 of the diameter of the file
Depth calliper
0.64 mm (0.025")
60°
Round the
angle off
Parallel
33 - 120