Playback Mode; Record Mode - Technaxx Easy Security Camera Set TX-28 Bedienungsanleitung

Connect the 5VDC power adapter to the camera, connect the 12V/1A DC power
adapter to the Receiver and turn on the receiver (has a built-in battery).
Press "Pair Code" at the wireless camera power connector to pair the camera to the
receiver. When the connection is established you see in the background of the Main
Menu the motion the camera is focused on.

8.1. Playback Mode

8.2. Record Mode

Manual Capture
Press UP or Down navigation
key to select
Capture".
Press OK key to confirm.
Press Menu key to display the main menu.
Press LEFT or RIGHT navigation key to select the "Playback
Mode". Press OK key to enter it.
Attention: Playback mode can be selected only if a MicroSD
card is inserted! If files are saved in different folders, select the
file you want to playback.
Press OK key to enter and then select the file to play.
Press Menu key again to Exit.
Press Menu key to display the main menu.
Press LEFT or RIGHT navigation key to select the "Record
Mode". Press OK key to enter it.
Then below settings are shown:
"Manual