Revitive ARTHRITIS-KNIE 2836AB Bedienungsanleitung Seite 16

EN
Instructions for use
R
Do NOT use the Body Pads on your head, face, neck or chest.
R
b Clean and dry the area where you will place the Body Pads.
c Make sure REVITIVE is switched off. If the control panel is
still illuminated, press the power button and turn REVITIVE
off.
d Attach the ends of the Body Pads to the Electrode cord.
Press connectors until there is no gap between them.
Leaving a gap may cause discomfort.
e Plug the other end of the Electrode cord into the opening
on the side of REVITIVE.
Plugging in the Electrode cord will automatically turn the
foot-pads off.
30
4397_IFU02_16220241.indd 30-31
All manuals and user guides at all-guides.com
R
R
R
R
R
R
R
f Remove the plastic liner from the Body Pads, by peeling it
off carefully. Replace the Body Pads onto the plastic liner
after use.
R
g Press the Body Pads on the area you wish to apply
electrical stimulation, as shown on page 29, gently
R
pressing the adhesive side against the skin.
R
h Press the power button on the device or on the remote
control to turn REVITIVE on.
You will hear a beep and the display lights will light up.
The time will read 30 minutes, the
read 00 and the EMS symbol will be displayed.
NB REVITIVE Body Pads will automatically provide
stimulation in EMS mode.
See page 23 for instructions on how to use EMS mode.
i
Press the TENS button on the remote control.
You will then see the TENS symbol on the display.
EN
R
R
Intensity will
31
25/01/2019 14:51