Asus WL-550gE Schnellanleitung Seite 10

After setting the connection type, you are to set up your wireless interface. First, give
3
an SSID (Service Set Identifier), which is a unique identifier attached to packets sent
over WLANs. This identifier emulates a password when a wireless device attempts
communication on the WLAN. Because an SSID distinguishes WLANs from each
other, access points and wireless devices trying to connect to a WLAN must use the
same SSID.
If you want to apply security solution to
4
your wireless network, select a proper
level (Middle or High) in the Security
Level menu; then specify WEP Keys in
the following boxes.
Medium : only users with the same
WEP key are to connect to this access
point and to transmit data using 64bits or
128bits WEP key encryption.
High: only users with the same WPA Pre-Shared Key (WPA-PSK) are to connect to
this access point and to transmit data using TKIP encryption.
Note: The ASUS wireless router configuration page features a convenient approach
to setup the WEP Keys: with only a few taps on your keyboard to define the
Passphrase, the system will automatically generate four strings of WEP Keys.
For ASUS wireless adaptor users, it is no longer necessary to input long and
complicated WEP Keys when connecting the router with the wireless client; the
Passphrase provides an easy way for setting up your wireless environment!
For example, if we input select WEP-
64bits encryption mode, input 11111 as
Passphrase, then the following WEP
Keys are generated as shown in the right
picture. Record the Passphrase and the
WEP keys on your notebook, then click
Save.
5
C l i c k F i n i s h t o c o n t i n u e . Yo u a r e
prompted to save the settings. Click
Save&Restart to save the settings to the
ASUS Wireless Router and enable the
new settings.
6 Next we are to setup encrypted wireless connection for wireless router and wireless
client. If you have installed ASUS wireless adaptor as well as the utility, click Start
-> Programes -> ASUS Utility-> WLAN Card -> One Touch Wizard to open the
connection setup utility on the client end.
WL-550gE Quick Start Guide
9