Asus WL-566gM Schnellstarthilfe Seite 10

4
The ASUS wireless router configuration page provides a convenient approach to setup the WEP
Keys: you can set up a Passphrase and let the system use certain algorithm to generate four WEP
keys. Thus, instead of inputting long WEP
keys, you can set up the encryption by fill in
a single Passphrase.
For example, if we select WEP 64bits
encryption mode and input 11111 as the
Passphrase, the WEP Keys are generated
as shown in the right picture. Record the
Passphrase and the WEP keys in your
notebook, then click Finish. A window
prompts out asking you to save the
settings. Click Save&Restart to activate
the new settings.
After the settings on the wireless router are
5
complete, we are to setup encrypted wireless
connection between the wireless router and
your PCs pre-installed with wireless cards.
If your use ASUS Wireless Card, you can use ASUS One Touch Wizard to setup the connection.
You can also choose Windows
connection.
Note: We recommend using 240 MIMO wireless adpaters to connect WL-566gM so
as to achieve high speed data transmission.
Configure WLAN Card with ASUS One Touch Wizard
6
If you have installed ASUS wireless card together with its utilities and drives on your PC, click Start
-> Programes -> ASUS Utility-> WLAN Card -> One Touch Wizard to launch the One Touch
Wizard utility.
WL-566gM Wireless Router Quick Start Guide
XP Wireless Zero Configuration service to configure the wireless
®