Thema/Issue
•
Akku lässt sich nicht voll aufladen
•
Battery can not be fully charged
•
Fehler 140 wird angezeigt
•
Error 140 is displayed
•
Energierückgewinnung beim Bremsen nicht aktiv
•
Energy recuperation not active while braking
Lösung/Solution
•
Verwendung eines anderen, baugleichen Ladegeräts
•
Use of another, identical charger
1.
Überprüfung der Spannung des Gasseils: 2-4 mm
Leerweg am Gasdrehgriff
2.
Überprüfung der elektrischen Spannung am Hall-Sensor
laut Service Manual
1.
Check the tension of the gas cable: 2-4 mm free travel
distance at the twist grip
2.
Check the voltage at the Hall Cable Sensor according to
the service manual
1.
Funktion der Bremsleuchte überprüfen
2.
Energierückgewinnung funktioniert nur wenn
Batterieladezustand geringer als 95 % ist
1.
Check function of the brake light
2.
Energy recuperation is only active if the battery level is
lower than 95 %
4