Inhaltsverzeichnis
Werbung
R E M OT E CO N T R O L ( S E E I M AG E C )
V
Power button
z
Automatic function button
x
Warm mist function button
c
Humidity settings button
v
Negative ion function button
b
B E F O R E F I R S T U S E
V
1.
Rinse the following parts with hot water:
– Water tank
5
I N S TA L L AT I O N
V
1.
Place the appliance on a stable, flat, and heat and moisture resistant surface.
Remove the water tank
2.
from the appliance.
5
Unscrew the water tank lid q.
3.
Screw the descaling cartridge onto the water tank lid q.
4.
5.
Fill the water tank
with clean, cold tap water.
5
6.
Screw the water tank lid
back onto the water tank 5.
q
7.
Place back the water tank 5.
8.
Leave the appliance for 30 minutes without switching on the appliance.
After 30 minutes, the appliance is ready for use.
S W I TC H I N G O N T H E A P P L I A N C E
V
Plug the power cable
1.
into a power outlet.
7
– A signal sounds to indicate that the appliance is in standby mode.
Press the power button l.
2.
– The display lights up.
3.
Press a desired function button to set up the appliance according to your preference.
AC T I VAT I N G T H E A R O M A F U N C T I O N
V
Remove the water tank
1.
from the appliance.
5
2.
Remove the aroma chamber 3.
3.
Add a few drops of water-soluble aroma oil onto the sponge in the aroma chamber 3.
4.
Place back the aroma chamber 3.
5.
Place back the water tank 5.
6.
Switch on the appliance.
– When you switch on the appliance, the aroma function activates automatically.
When you want to deactivate the aroma function or when the appliance isn't used for a extender
4
period of time, make sure to remove and clean the aroma chamber properly.
AU TO M AT I C S H U T D O W N W H E N T H E WAT E R TA N K I S E M P T Y
V
When the water tank
is empty, a threefold signal sounds. The water tank empty LED
5
and the other LED indicators switch off. The appliance automatically stops humidifying.
When the water tank is empty, do the following:
1.
Switch off and unplug the appliance.
2.
Let the appliance cool down.
3.
Fill the water tank
with clean, cold tap water.
5
24
UV light function button
n
Timer button
m
Humidification output button
Q
Night function button
W
lights up
i
C L E A N I N G A N D C A R E
V
We recommend cleaning the appliance every week. To clean the appliance:
1.
Switch off and unplug the appliance.
2.
Let the appliance cool down.
3.
Clean the outside of the appliance with a damp cloth and a mild detergent.
4.
Remove the water tank
from the appliance.
5
5.
Unscrew the water tank lid q.
6.
Empty the water tank
above a sink.
5
7.
Rinse the water tank
with water.
5
Remove the aroma chamber 3.
8.
Clean the nebuliser chamber
9.
with mild soap and water.
4
10. Rinse the nebuliser chamber
with clean water.
4
If white limestone deposits arise, clean the water tank and the nebuliser chamber with water and a
4
descaling agent suitable for humidifiers.
11. Remove the filter cover
by pushing on the symbol.
6
12. Remove the net filter
and the HEPA/active carbon filter 8.
9
13. Rinse the filter cover
and net filter
with lukewarm water.
6
9
Replace the HEPA/active carbon filter once per half year or at least once a year, depending on the
4
frequency of use. You can acquire a new HEPA/active carbon filter via Solis or your dealership.
14. Dry all parts with a soft cloth.
S TO R AG E
V
1.
Empty the water tank
and the nebuliser chamber 4.
5
Leave the water tank
2.
open until completely dry.
5
3.
Dry the appliance with a soft, dry cloth.
4.
Store the appliance in a dry and enclosed space.
T E C H N I C A L S P E C I F I C AT I O N S
V
Model-No.
Voltage / frequency
Output
Dimensions (W x D x H)
Weight
Humidity range
Suitable room size
Water tank capacity
Technical changes reserved.
SH802A, Type 7217
220–240 V~ / 50 Hz
25 W cool humidification
105 W warm humidification
24 x 17 x 37.5 cm
2.45 kg
40% - 80%
40 m
2
/ 100 m
3
4.5 L
25
Werbung
Inhaltsverzeichnis
