ARMODD Silentwatch 5 Pro Bedienungsanleitung Seite 88

EN CZ
Important notes, recommendations and FAQs
1. To save the values measured and the current date and time,
make sure you synchronise the smartwatch with the app on
a daily basis. During the night, the values measured by the
smartwatch may reset.
2. This product is not a medical device. Neither the smartwatch
nor the app are intended for the diagnosis, treatment or
prevention of illnesses and symptoms thereof. The values
measured are illustrative and may differ from values measured
by certified medical devices as well as because of the method
of measurement and tightness of the strap. The sensor on
the reverse side of the smartwatch must be in contact with
the wrist, and the strap must be tight. If the strap is loose and
the sensors dirty, the precision of the measurements will be
compromised.
3. In order to ensure correct date and time settings, the smart-
watch must be paired with a phone. Then the date and time
will be set automatically.
4. The smartwatch has the IP67 degree of protection. We
recommend avoiding contact of the smartwatch with water
under pressure, fast and rapidly flowing water, spraying and
hot water and steam, because when using the smart watch,
due to wear and tear of the case or its mechanical damage
and microscopic cracks in the seal, water can penetrate into
the smartwatch and cause damage.
5. You have stopped receiving incoming calls or SMS notifica-
tions – check that the smartwatch is paired with your phone
and the notifications are allowed in the app (Fig. 3) and in the
settings of your phone, and that the do-not-disturb mode
has not been activated in the app. Make sure Bluetooth is on
in your phone. Do not pair the smartwatch via the phone's
Bluetooth menu.
88