Important Notifications, Recommendations And Faqs - ARMODD Squarz 11 Pro Bedienungsanleitung

EN CZ
Important notifications, recommendations
and FAQs
1. To save the values measured and the current date
and time, make sure you synchronise the smartwatch
with the app on a daily basis. During the night, the
values measured by the smartwatch may reset.
2. This product is not a medical device. Neither the
smartwatch nor the app are intended for the diagnosis,
treatment or prevention of illnesses and symptoms
thereof. The values measured are illustrative and may
differ from values measured by certified medical devi-
ces as well as because of the method of measurement
and tightness of the strap. The sensor on the reverse
side of the smartwatch must be in contact with the
wrist, and the strap must be tight. If the strap is loose
and the sensors dirty, the precision of the measure-
ments will be compromised.
3. In order to ensure correct date and time settings, the
smartwatch must be paired with a phone. Then the
date and time will be set automatically.
4. The smartwatch has the IP67 degree of protection. We
recommend avoiding contact of the smartwatch with
water under pressure, fast and rapidly flowing water,
spraying and hot water and steam, because when
using the smart watch, due to wear and tear of the
case or its mechanical damage and microscopic cracks
in the seal, water can penetrate into the smartwatch
and cause damage.
5. You have stopped receiving incoming calls or SMS
notifications – check that the smartwatch is paired with
your phone and the notifications are allowed in the
app (Fig. 3) and in the settings of your phone, and that
the do-not-disturb mode has not been activated in the
app. Make sure Bluetooth is on in your phone. Do not
pair the smartwatch via the phone's Bluetooth menu.
6. The smartwatch cannot be paired with a phone
88