Cisco Systems Linksys WPC54G Kurzanleitung Seite 5

If the network utilizes wireless security,
you will need to configure security on
the Adapter. If not, you will be taken
directly to the Congratulations screen,
shown in Step B.
A
If wireless security has been
enabled on this network, you will
see a wireless security screen. If
your network utilizes WEP (Wired
Equivalent Privacy) encryption,
the WEP Key Needed for Connec-
tion screen will appear. If your net-
work utilizes WPA-Personal
encryption, the WPA-Personal
Needed for Connection screen
will appear.
WEP Key Needed for Connection
Select 64-bit or 128-bit.
Enter a passphrase or WEP key.
Passphrase - Enter a passphrase
in the Passphrase field. This is
case-sensitive and should not be
longer than 16 alphanumeric
characters. It must match the
passphrase of your other wireless
network devices.
WEP Key - The WEP key must
match the WEP key of your wire-
less network. For 64-bit encryp-
tion, enter exactly 10
hexadecimal characters. For 128-
bit encryption, enter exactly 26
hexadecimal characters. Valid
hexadecimal characters are "0"
to "9" and "A" to "F".
Then, click Connect and pro-
ceed to Step B.
WEP Key Needed
5