Transport - Melitta CI Bedienungsanleitung

Transport, Storage and Disposal
It is recommended to vent the appliance
if it will not be used for an extended
period of time and before transport. This
also protects the appliance against frost
damage.
■ Remove the water filter if necessary
(Page 39).
■ Place a vessel under outlet 3.
■ Call up the System sub-menu.
■ Select Venting in the menu.
■ Select Start in the menu.
■ Flip up the lid of the water tank 6 and
pull the water tank 6 up and out of the
appliance.
■ Connect the tube to the drip tray and to
the outlet (Image D).
■ Press the rotary switch 10 to confirm.
The appliance heats up.
■ The appliance is vented and then
switches off completely.

Transport

■ Vent the appliance.
■ Empty and clean the drip tray and coffee
grounds container.
■ Empty the water tank and th bean
container. If necessary, vacuum out
beans that are stuck at the bottom.
■ Secure loose parts (cup plate etc.) with
suitable adhesive tape.
■ If possible, transport the appliance in
the original packaging including the hard
foam elements.
Disposal
This appliance is labelled according to
the European Directive 2002/96/EC on
waste electrical and electronic equipment
(WEEE). The Directive prescribes the
framework for a EU-wide applicable return
and recycling of waste appliances. Please
contact a specialised dealer for current
disposal procedures.
40
Water °d
hardness
range
Soft 0 – 1 0
Medium 10–15
Hard 15–20
Very hard >20
°e °f
0–13 0–18
13–19 18–27
19–25 27–36
>25 >36