Sensor Data Transmission; Clock; Clock Reception - Oregon Scientific BAR310HG Bedienungsanleitung

The transmission range may vary depending on many
factors. You may need to experiment with various locations
to get the best results.
Standard Alkaline batteries contain significant amounts of
water. Because of this they will freeze in low temperatures
of approximately -12°C (10°F). Consumer grade lithium
batteries have a much lower threshold for temperature with
an estimated freezing range of below -30°C (-22°F).
Wireless ranges can be impacted by a variety of factors
such as extremely cold temperatures. Extreme cold may
temporarily reduce the effective range between the sensor
and the base station. If the unit's performance fails due to
low temperature, the unit will resume proper functioning
as the temperature rises to within the normal temperature
range (i.e. no permanent damage will occur to the unit due
to low temperatures).

SENSOR DATA TRANSMISSION

The sensor reception icon shows the status.
ICON
and "--.-"
(temperature area
)
To search for a sensor:
Simultaneously, press and hold MEM and CH for 2
seconds.
NOTE
If the sensor is still not found, check the batteries,
obstructions, and remote unit location.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its calendar clock
automatically once it is brought within range of a radio
signal:
•
DCF-77 generated from Frankfurt, Germany for Central
Europe.
The clock collects the radio signals whenever it is within
1500 km (932 miles) of a signal.
5
DESCRIPTION
Main unit is searching for
the sensor(s)
A channel has been
found
Sensor 1 is sending data
The sensor cannot be
found. Search for the
sensor or check batteries