Error Code; Error Handling; Warranty And Maintenance - Em2Go Emb011Ac1Rw Bedienungsanleitung

GB
LED

Error code

LED flashes: Fault code 22
2 × red, 2 × yellow EV not supported
LED flashes: Fault code 23
2 × red, 3 × yellow Relay error
LED flashes: Fault code 24:
2 × red, 4 × yellow RCMU error
LED flashes: Fault code 25:
2 × red, 5 × yellow Protective conductor fault
LED flashes: Fault code 26:
2 × red, 6 × yellow PEN leakage protection

Warranty and maintenance

• The warranty period for this charger is two years.
• The warranty expires if:
• No proof of purchase can be provided.
• Exceed the warranty period specified by the manufacturer.
• The instructions for use, maintenance and storage are not followed.
• damage or malfunctions are caused by the ingress of foreign bodies.
• In case of repair, disassembly or modification by unauthorized persons.
• Damage caused by force majeure (such as lightning, overvoltage, earthquake, fire, flood, etc.).
• Damage and malfunctions are caused by other avoidable external factors.
• damage and malfunctions are caused by improper use of the equipment, such as the ingress of
water or other liquids.
• damage and malfunction are caused by the mains power supply and a voltage that is not specified
for use with the charger.
No liability for possible damage will be accepted in the event of incorrect operation.
If you need technical support, please contact our support team via our website www.em2go.de.
We hereby declare that this device has the CE marking in accordance with the
regulations and specifications. It therefore complies with the Essential Requirements of the
RED Directive 2014/53/EU, as well as the RoHS Directive 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following Internet address:
www.em2go.de/Konfo
Note on environmental protection:
From the date of implementation of the European Directive 2011/65/EU into national law, the
following applies: Electrical and electronic equipment must not be disposed of with household
waste. The consumer is obliged by law to return electrical and electronic equipment at the end
of its service life to the öffentlich collection points set up for this purpose or to the point of sale.
returned. Details are regulated by the respective national law. The symbol on the product, the
operating instructions or the packaging indicates these regulations. By recycling, material recovery or
other forms of recovery of old devices, you are making an important contribution to the protection of
our environment.
19

Error handling

- This EV does not meet IEC standards and cannot be charged.
- The device is damaged and must be sent to the factory for repair.
- The device is damaged and must be sent to the factory for repair.
- The charging station is not grounded or not grounded
correctly; the input power cable must be checked.
- Check if the charging plug and its cable are leaking.
- Restore after you pull out the adapter.
GB
21