Position "Sos; Boost" Mode - tecsup BABY Bedienungsanleitung

3.5 Position "SOS"

Pressing the «lighting» button again will switch the case into
«SOS» mode, the top LED will turn on and off to indicate an «SOS»
in Morse code.
>>> Typical Uses : sea rescue, mountain rescue, forrest fire
fighting, accidents etc.

3.6 "Boost" Mode

On the BABY Boost model, pressing "ON/OFF" for 3 seconds
activates the "Boost" mode. The light output is at its maximum for
about 20 minutes at 25°C. The duration decreases with increased
ambient temperature. To deactivate this mode, just press the
«lighting» button.
TECSUP - BABY - Manuel utilisateur - 80300106 L - P 22 / 50
BABY BABY