2/ Control Panel - tecsup BABY Bedienungsanleitung

The button "On /Off" switches the light on.
The lamp goes on instantly and reaches its full power in less than 3
seconds, whatever the outside temperature. A further push on the
button will switch the lamp off. A long press activates the «Boost»
mode (see #3-6).
The "Lighting'" button (E) selects the different power of
lighting :
• 100%
• 50%
• 15%
• Mode « beacon »
• Mode « SOS » in Morse
A long press activates the «Boost» mode (see #3-6).
When the BABY is OFF, one press activates the USB output to charge
small devices without switching on the LEDs (BABY & BABY Boost).
The led "Charge" gives the state of charge of the battery
pack and can indicate 5 different levels :
• green flashing
• green fix
• orange fix
• red fix
• red flashing
TECSUP - BABY - Manuel utilisateur - 80300106 L - P 20 / 50
BABY

2/ CONTROL PANEL

Stand-by
3 s
: charge 100 %
: charge > 60 %
: charge > 30 %
: charge > 10 %
: charge > 5 %
Charge
> 60 %
> 30 %
< 30 %