3/ The Different Lighhting Functions; Position 100; Position; Position 15 - tecsup BABY Bedienungsanleitung

3/ THE DIFFERENT LIGHTING FUNCTIONS

3.1 Position 100%

If the battery has more than 30% charge at the moment it is
switched on, the light will be on full power: 30w. If the battery has
less than 30% charge at the moment it is switched on, the power
of the light will be at 15w on startup.
When the battery is fully charged, the power of the light remains
at 100% for 3 hrs 30, then drops to 50% in order to reach a total
autonomy of well over 5 hrs 30. However, the user can over-ride
the drop in power by pushing the « lighting » button and reselecting
100%.
NB : the BABY Boost model has two 100% positions. The first
corresponds to an illumination with a wide focal length, the second
toggles to a narrow focal length.

3.2 Position 50%

With one push on the « lighting » button, the user can limit the
lights power to 50% which makes the lights autonomy climb to well
over 9 hrs.

3.3 Position 15%

The user can switch to 15% of the lighting power by pressing the
«lighting» button again. This low consumption makes the lights
autonomy climb to over 24 hours.
Note that even with this reduced light, you are still able to see
clearly enough to move around, to read, etc.

3.4 Position "Flashing Beacon"

After pressing «lighting» again, the case switches to «flashing
beacon» mode. The LED lamp will then flash every two seconds, this
mode enables the user to signal his position clearly and anywhere.
>>>Typical Uses : sea rescue, mountain rescue, forest fire fighting,
accidents etc.
TECSUP - BABY - Manuel utilisateur - 80300106 L - P 21 / 50 TECSUP - BABY - Manuel utilisateur - 80300106 L - P
BABY BABY