JOBOBIKE Bruno Bedienungsanleitung Seite 85

Check that the seat is adjusted properly, and seatpost quick release lever is securely tightened.
Ensure that battery is charged and without damage before each use.
Battery Lock battery to frame and ensure that it is secured.
Charge and store the bike in a dry location with a temperature between 10 °C–25 °C (50 °F–77 °F).
Let bike dry completely before using again.
Look over connectors to make sure they are fully seated and free from debris or moisture.
Electrical Cables
Check cables and cable housing for obvious signs of damage.
Ensure that the headlight is funtioning and adjusted properly without being unobstructed.
Ensure that all reflectors are properly fitted and not obscured.
Ensure that all other fittings on bike are properly secured and functioning.
Inspect helmet and other safety gears for signs of damage.
Accessories
Ensure that the rider is wearing a helmet and other required riding safety gears.
Ensure that the mounting hardware is secured when fitted with a front rack, rear rack, basket, etc.
Ensure that the taillight and taillight power wire are properly secured when fitted with rear rack.
Ensure that the fender mounting hardware is properly secured with no cracks or holes in fenders.
Your cables, spokes, and chain will stretch after an initial break-in period of 80-160 km (50-100 mi), and bolted connec -
tions could loosen. Always have a certified bike mechanic perform a tune-up on your bike after your initial break-in pe -
riod of 80–160 km (50–100 mi) (depending on riding conditions such as total weight, riding characteristics, and terrain).
Regular inspections and tune-ups are particularly important for ensuring that your bike remains safe and comfortable to
ride.
35