ofinto Elevate Bedienungsanleitung Seite 25

Because the ofinto Elevate office desk is height adjustable,
it is essential to have free space/safety clearances in both
the height adjustment zone and surrounding the desk. This
is to ensure that adjusting the desk height does not damage
surrounding objects or the desk itself, or cause injury to the
user or others. Before every operation, ensure that there is
an all-round safety clearance of at least 25mm between the
table top and other objects. Because of the risk of injury or
damage, do not position the ofinto Elevate office desk flush
with similar or other tables.
The ofinto Elevate has automatic collision protection. Under
certain conditions, the collision protection may not function
properly. That is, if the collision occurs during initialization,
during the first second of operation or over too long a period
of time, i.e. with a soft or moving object.
Before changing the desk height, always check that the
height adjustment zone is unobstructed both above and
below the table top. Otherwise, the desk and the objects
standing in the way suffer damage. When operating the
height adjustment function, make sure that no persons are
within the height adjustment range, otherwise injuries such as
crushing may occur.
Check that cable connections to electronic devices on the
desk are of sufficient length. Do not connect cables to de-
vices on other tables or shelves. Cables must not be pinched
E
or crimped.
25