Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Notes; Installation Instructions; Technical Data; Symbol Description - HANSGROHE Rainfinity 250 3jet 26232 Serie Gebrauchsanleitung, Montageanleitung

Vorschau ausblenden Andere Handbücher für Rainfinity 250 3jet 26232 Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Safety Notes

� Gloves should be worn during installation to prevent
crushing and cutting injuries.
� The arm of the shower head is intended only to hold
the shower head. Do not load it down with other
objects!
� The product may only be used for bathing, hygienic
and body cleaning purposes.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• During installation of the product by qualified trained
personnel, make sure that the entire fastening surface
is even and smooth (no protruding seams or tile
offset), that the finish of the wall is suitable to apply
the product and has no weak points.
• The mesh washers must be installed to protect
against incoming dirt by pipework. Incoming dirt can
impair the function and/or lead to damages on
functional parts of the fixture; Hansgrohe will not be
held liable for resulting damages.
• The product is not designed to be used with steam
baths!

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
• The product is exclusively designed for drinking
water!
• This mixer cannot be used in conjunction with
hydraulically, electronically or thermally controlled
instantaneous heaters.

Symbol description

Do not use silicone containing acetic acid!
Fault
Head shower extremely leaky
4
max. 1 MPa
0,17 - 0,4 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 60°C
42°C
70°C / 4 min
Cause
- Head shower soiled / scaled
Assembly (see page 36)
English
Dimensions (see page 47)
Flow diagram (see page 47)
Installation example (see page 32)
i
The wall must be reinforced in this area.
X
Center shower tub
Warm water
Cold water
Spare parts (see page 49)
XXX = Colors
000 = Chrome Plated
700 = Matt White
+
Special accessories (see page 49)
(order as an extra)
• extension 25 mm #13595000
• levelling set 1° #95521000
Cleaning (see page 42)
Operation (see page 39)
Remedy
- Clean / descale head shower

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rainfinity 360 3jet 26234 serie

Inhaltsverzeichnis