Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Dishes are not
You have not loaded them
clean
correctly.
The programme is not
powerful enough.
Not enough detergent has
been dispensed.
There are items blocking the
spray arms movement.
The filtering set is not clean
or not correctly placed in the
bottom of the dishwasher.
This may block the spray
arms holes.
Opaque glass
Combination of soft water
and too much detergent.
White spots
Areas with hard water may
appear on plates
cause lime deposits.
and glasses
Black or grey
Aluminium items have
marks on
brushed against the
tableware
tableware.
There is
The dishes block the
detergent in the
detergent dispenser.
dispenser
94
Read the "Preparing and loading the
dishes" section.
Select a more intensive programme.
Use more detergent or change the
detergent.
Place the items again so the spray arm
can move freely.
Clean and/or place the filter correctly.
Clean the spray arm holes.
Use less detergent if you have soft
water and select a shorter cycle to
wash the items made of glass.
Check the water softener settings or
the salt deposit filling.
Use a mild abrasive cleaner to remove
these marks.
Load the dishes again correctly.
The dishes are
Inadequate load.
not dry.
You are removing the dishes
too fast.
You have selected an
inadequate programme.
Use of low-quality coated
cutlery.
Warning
Cecotec cannot be held responsible for unprofessional repair as this may cause serious risks
to the safety of the user of the appliance and affect the warranty.
Error codes
If there is a malfunction, the dishwasher will display an error code. The next table shows
possible error codes and their causes.
Codes
Problem
E1
The dishwasher needs more
time for the water to enter.
E3
The desired temperature is
not reached.
E4
Overflow.
ENGLISH
Wear gloves if you find detergent
residues on the dishes to avoid skin
irritation.
Do not empty the dishwasher
immediately after the wash. Open the
door slightly to allow steam to escape.
Do not take the dishes out until the
interior temperature is safe to the
touch. Unload first the lower basket
to avoid water from dripping from the
upper basket.
With a short programme, the washing
temperature is lower, which decreases
the cleaning performance.
Choose a programme with longer
washing time.
The water draining is more difficult
with these items. The cutlery or
tableware of this kind cannot be
washed in the dishwasher.
Possible causes
The taps are not open, or the
water inlet is limited, or the
water pressure is too low.
Heating element failure.
Some element in the
dishwasher is leaking.
95
AGUAZERO 8000 FULL BUILT-IN
Werbung
Inhaltsverzeichnis
