Cresta DTX500 Bedienungsanleitung Seite 48

Low b b b b attery Low Low Low attery attery attery condition condition condition condition display
The weather station displays the low battery condition symbol to remind the batteries of the
weather station or the outdoor sensor need to be exchanged.
• Weather station low battery condition display: within indoor area of the display
Outdoor sensor low battery condition display: in the outdoor area of the display
•
RF connection connection to to to to the
RF RF RF connection connection
Press and hold the key "␇ ␇ ␇ ␇ " for 3 seconds to search for outdoor sensor , the RF signal
•
symbol at the outside area will flashing when trying to connect . RF reception is weaker in
rooms with concrete walls (e.g. in the basement) and in office buildings, the distance will be
shorten if have interference. For extreme cases, please put the main unit near a window
Recep Recep tion tion tion of of of of radio radio radio
Recep Reception radio controlled
• DCF radio signal search starts automatically about 3 minutes after battery exchange. The
"radio tower" signal is flashing.
Press " " " " ▼ ▼ ▼ ▼ " " " " , , , , " " " " ▲ ▲ ▲ ▲ " " " " for more than 3 seconds to enter or quit the Radio controlled signal reception
•
• The clock synchronizes with the DCF radio signal automatically and daily from AM 1:00 to
3:00 to correct potential time deviations each hour. If the synchronization is unsuccessful
("radio tower" symbol disappears), a further synchronization attempt is made From 4:00 and
5:00 until success.This process is repeated up until 5:00 AM. If still not success, daily
reception stop.
Information Information Information Information
Flashing "radio tower" symbol stands for DCF radio signal reception started.
•
• Continuous "radio tower" symbol stands for DCF radio signal reception successful.
Please observe a minimal distance of 2.5m to sources of interference such as televisions or
•
computer screens.
The radio signal is weaker in rooms with concrete walls (e.g. in the basement) and in office
•
buildings. For extreme cases, please put the main unit near a window.
• There are less atmospheric disturbances at night. A radio time signal reception is usually
possible at that time. One synchronisation per day is sufficient to keep the time display
accuracy at 1 second.
Tip Tip
Tip Tip
You can adjust the time manually in case the clock cannot receive the DCF radio signal (due to
interferences, large distance to the sender, obstructions like mountains, etc.) As soon as the radio
signal can be received, the clock wil be adjusted automatically.
Radio signal sender coverage up to 1500km distance to Frankfurt/Main.
display display display
the outdoor sensor
the the outdoor outdoor sensor outdoor sensor sensor
controlled controlled
controlled signal
signal signal
signal