Cresta DTX500 Bedienungsanleitung Seite 39

Outdoor sensor:
Frequency: 433 MHz
•
• Transmission range: 100 meters in open area.
** Actual distance may be varied depending upon the enviroment, it will be shortened if with
interference ,such as concrete wall etc.
• Batteries: 2 x AA, LR6 1.5V
Installation Installation Installation Installation
Inst Installing Inst Inst alling alling the alling the the the Batteries
• • • •
Open the main unit battery cover located at the back of the unit and insert 3XAA batteries
•
into the battery compartment and close the battery cover.
Pull away the shower proof casing of the thermo-hyrgro sensor to reveal the 2 sockets.( for
•
the wind sensor and rain sensor )
Connect the attached cables 1.cable from wind speed sensor insert into the socket of wind
•
direction sensor 2. cable from wind direction and cable from rain sensors to the
corresponding sockets of the thermo-hygro sensor by clicking them into place. Make sure
that rain and wind cables are connected to the correct sockets.
Batteries Batteries Batteries