Installing The Heater - Zibro SRE 340 E Gebrauchsanweisung

Using the right fuel is therefore essential for safe, efficient, and comfortable use
of your heater.
Damage and/or malfunctions of the heater due to the use of other than high
quality water-free pure paraffin oil is not covered by the warranty.
Always refer to your local Zibro dealer for the right fuel for your heater.
MANUAL
A

INSTALLING THE HEATER

1 Carefully remove your Zibro from the box and check the contents.
In addition to the heater you also need to have:
a manual fuel pump
a transportation cap
these directions for use
Keep the box and the packaging materials (Fig. A) for storage and/or
transportation.
Open the lid of the removable tank ¿ and remove the piece of cardboard.
2
Fill the removable tank as indicated in Section B.
The floor should be firm and completely level. Reposition the heater, when it
is not level. Do not try to correct the situation by placing books or other
goods under the heater.
Insert the plug ¸ into the wall-socket (230 Volts - AC / 50 Hz) and set the
correct time using the adjustment keys
Your Zibro is now ready for use.
(refer to Section C).
75