Zibro SRE 340 E Gebrauchsanweisung Seite 87

Press the "timer" button ⓰ to exit the weekly timer setting mode and return to
the time and a day of the week display. Timer lamp turns off.
COPYING THE SETTING FROM ONE DAY TO ANOTHER
Use the copy function if there are multiple days during one week which should
have the same setting times.
Then, use the adjustment keys
minute. Press the adjustment key
increase the minute and the key
decrease the minute.
extension/day/set ⓳ to select the right
minute.
Use the adjustment keys
at which the heater must shutt off.
Press the adjusment key
hour and the key to decrease the hour.
Press extension/day/set ⓳ to select the
right hour.
Then, use the adjustment keys
minute. Press the adjustment key
increase the minute and the key
decrease the minute.
extension/day/set ⓳ to select the right
minute.
The settings for program 1 for Monday are
programmed and the display shows SET for
3 seconds.
After 3 seconds choose another day or end
the setting mode by pressing timer.
Make sure that the heater is not burning.
Press the timer key ⓰. Use the adjustment
keys until the day of its source is dis-
played in the display.
Press extension/day/set ⓳ to select.
The display shows:
to set the
to
to
Press
to set the hour
to increase the
to set the
to
to
Press
83