Output Level - Ashdown Engineering ROOTMASTER EVO II Bedienungsanleitung

ROOTMASTER EVO II
USER GUIDE
Sub harmonics
This section produces sub harmonics an octave below the notes being
played. The level of these sub harmonics relative to the straight bass
sound can be adjusted using the level control. This is very effective in
thickening the sound and you will find in use that only a small degree
of this lower octave is required to really fill out the sound and provide a
character that is not possible by any other means.
The degree of sub harmonics is also dependant on the setting of the bass
control.
Sub harmonics are switched in/out with the push button below and to the
left of the sub harmonics level control.

Output level

The output control adjusts the overall level of the amplifier. Adjust this for
your preferred overall stage playing volume.
Line Mix
The line mix is an output control adjusts the overall level of the amplifier
vs the Line input signal. Adjust this for your preferred overall mix if using
a line input such as a backing track.
D.I.
A balanced D.I. Is provided on the rear panel xlr socket. This provides a
post E.Q. Post effects signal.
The output signal from this xlr socket is set to a level and impedance suit-
able for connecting directly into a balanced microphone input of a mixing
desk for either direct injection into the pa system or for recording.