BESAFE iZi Turn E-M i-Size Bedienungsanleitung Seite 2

4
Pairing with the mobile phone app to activate/adjust
the monitoring functions
1. Download the application "BeSafe DigitalSafety" using your App Store or
Play Store.
2.
Sign up by following the instructions in the app.
3. Follow the instructions in the app to pair your seat with your mobile
phone.
•
Each seat can be paired with up to 8 mobile phones.
•
Each phone can be paired with up to 8 BeSafe seats that feature the
DigitalSafety™ monitoring system.
•
After pairing, you can name the child seat in the app and add more
information about the child using the seat if you like.
•
In the app, you can see the battery status of the monitoring system, see
the buckle status of your seat, add emergency contacts and adjust your
settings.
Unbuckling alarm
•
The unbuckling alarm function gets activated once the buckle is closed.
AAA
• Once the buckle gets opened, there is an alarm on the seat. This alarm
AAA
functions independent of if a paired phone is in proximity or not.
•
This alarm function is also independent of if the car is moving or not, e.g.
if you are standing at a traffic light.
•
The alarm ends after 2 seconds.
• You can adjust the volume level of the alarm in your mobile app.
Anti-abandon alarm
•
The anti-abandon alarm function gets activated once the buckle is closed
and a paired mobile phone is in proximity.
• If the paired mobile phone leaves the car (i.e. the Bluetooth connection
gets lost) while the buckle is still closed, the anti-abandon alarm is
triggered.
•
In stage 1, you receive a notification on your mobile phone, which needs
to be acknowledged within 2 minutes in order to prevent the next alarm
stage.
•
In stage 2, an alarm sound is produced on your mobile phone, which
needs to be turned off within 2 minutes in order to prevent the next alarm
stage.
•
In stage 3, a SMS notification is sent to your emergency contacts entered
in your account.
• All 3 alarm stages are triggered even if the application is running in the
background (applies to both iOS and Android)
Battery information
•
The seat is delivered with batteries already mounted into the hub of the
monitoring system.
•
You can see the battery level of the monitoring system hub in your mobile
phone app. If the battery level is below 25%, you receive a notification.
•
To replace the batteries, you need to access the hub of the monitoring
system.
• To access the hub, take out all inserts/cushions from the seat. Zip open
the fabric in the backrest area and fold it down. Lift up the cover where
the left hip belt comes out of the seat. Beneath the cover there you can
access the hub and slide open the battery lid to access the batteries. After
replacing, make sure to close the lid properly again and close the fabric
cover again. A more detailed instruction can be found in the app.
•
The monitoring system hub requires non-rechargeable 2xAAA 1.5V
Alkaline batteries to function.
•
Caution: Risk of danger if battery is replaced by an incorrect type.
•
Only use high-quality batteries and make sure they are not damanged or
leaking.
Factory reset
•
If you want to remove all paired devices from the seat, e.g. if you want to
give the seat to a friend, you can do this via the factory reset function.
•
You find the factory reset hole under the battery lid of the monitoring
system hub. To access the hub, follow the instructions in the section
"Battery information".
•
More information can be found in the app.
IMPORTANT: Before disposing the seat at the end of its
lifetime
•
By ensuring that the product, batteries, and electronic parts are disposed
of correctly, you will help to prevent potentially negative consequences
for the environment and human health which could be caused by
inappropriate waste handling.
• Please contact your local authority for further details about your nearest
designated collection point.
5