Empty Water Tank - Comedes Demecto 30 eco Bedienungsanleitung

If the filter indicator lights up, the dust filter must be checked/cleaned/replaced. Then the
display can be reset by pressing and holding (at least 3 seconds) the Sleep/Reset button.
Colour indicator:
Relative humidity
<44%
45%-65%
>65%
Empty the water tank:
When the water tank is full, the Comedes Demecto 30 eco switches off automatically and the
tank "full" indicator (Fig. 3) lights up. This is also signalled acoustically.
You must empty the water tank to be able to put the Demecto 30 eco back into operation.
To do this, always switch off the unit first and disconnect the mains plug.
Now empty the water tank completely into a wash basin or similar.
Colour
indicator
Blue
Green
Red
Grasp the water tank with both hands at the
recessed grips provided on the side and
carefully pull it backwards out of the
appliance.
Carefully reinsert the tank after it
has been completely emptied. To
do this, grasp the water tank on
both sides and push it straight
into the appliance.
Make sure that the tank is
correctly inserted to ensure
proper operation of the unit.
ENG-11