VONROC VC508DC Originalbetriebsanleitung Seite 8

EN
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. On/Off switch
2. Carrying handle
3. Cover for battery
4. Battery
5. Battery unlock button
6. Locking clamp
7. Top section
8. Container
9. Blowing port
10. Vacuum port
11. Intake port
12. Hose
13. Foam filter
14. HEPA filter
8
CD802AA 15. Filter cage
16. Float
220-240V, 50Hz 0.4A
17. Dust collection bag
21V 2.5A
18. Triangular nozzle
19. Crevice nozzle
60 minutes
20. Car vacuum tool
120 minutes
21. Power tool adapter
CD801AA, CD803AA
22. Battery LED indicators button
23. Battery LED indicators
0.36 kg
24. Charger
25. Charger LED indicators
CD803AA
3. ASSEMBLY
Lithium-Ion
20V
4.0 Ah
CD802AA
0.65 kg
Inserting the battery into the machine (Fig. B1, B2)
1. Insert the battery (4) into the base of the machi-
2. Push the battery further forward until it clicks
Removing the battery from the machine
(Fig. B1, B2)
1. Push the battery unlock button (5).
2. Pull the battery out of the machine like shown
Checking the battery charging status (Fig. C)
• To check the battery charge status, push the
• The battery has 3 lights indicating the charge
• When the lights are not burning it means the
Charging the battery with the charger (Fig. C)
1. Take the battery (4) from the machine.
2. Turn the battery (4) to upside down position and
3. Push the battery until it is fully pushed into the
Before any work on the power tool, remove
the battery.
The battery must be charged before first use.
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
ne as shown in Fig. B1, B2.
into place.
in Fig. B1, B2.
button (22) on battery shortly.
level, the more lights that burn, the more char-
ge the battery has left.
battery is empty and must be charged
immediately.
slide it onto the charger (24) as shown in Fig. C.
slot.
WWW.VONROC.COM