Fifine T683 Benutzerhandbuch Seite 5

1. Screw the lower part of the C-clamp until it is tight and secure.
2. Insert the desktop boom arm into the hole
3. Fasten the screw
4. Fix shock mount with desktop boom arm
Note:
DON'T rotate the boom arm when the screw on the C- clamp is tightened. Loose the
screw first, adjust the position of the arm, and then tighten it.
Mount to your desktop via the included C-clamp accurately:
Unscrew the C-clamp and slide it over the side of your desktop, making sure that both
the top of the C-clamp and the underside are resting on flat surfaces.Overly rounded or
overhanging desktop edges do not make good mounting surfaces.
5