Anslut 014956 Bedienungsanleitung Seite 43

• Pull out the plug before
cleaning, service and/or any
other intervention.
• All the electrical connections
must be made according to
the wiring diagram on the
middle column behind the
water container.
FUSES
• The circuit board has a fuse
to provide protection from
overcurrent. The fuse data is
printed on the circuit board,
e.g: T 3, 15 A, 250 V (or 350
V).
• Note concerning fluorinated
gas
• Fluorinated greenhouse
gases are contained in
hermetically sealed products.
For specific information on
the type, amount and carbon
dioxide equivalent in tonnes
of fluorinated greenhouse
gases (some models), see
marking on product.
• Installation, electrical
connection, service,
maintenance and repairs to
the product should be
carried out by qualified
personnel.
• Dismantling and waste
management should be
carried out by qualified
personnel.
WARNING!
• Never use other objects or
methods than those
recommended by the
manufacturer to defrost or
clean the product.
• Store the product in a room
without sources of heat,
such as naked flame, LPG
products, electric heaters,
etc.
• Do not puncture or burn.
• Note that refrigerant can be
odourless.
• The floor area in the room
where the product is
installed must be at least 4
m².
• Follow national regulations
concerning gas.
• Keep the ventilation
openings clean and
unblocked.
EN
43