Computer Setup - Fifine K670 Bedienungsanleitung

Output Impedance: 2200
Equivalent Noise Level: 66dB-A
Max.SPL: 120dB(at 1kHz≤1% T.H.D
S/N Ratio: 66dB
Operating Current: 13mA ± 2mA
Typical Frequency Response Curve
Frequency Response (0dB=1V/pa)
+20
+10
0
-10
-20
-30
20 50 100 200 500 1K
Frequency Hz

COMPUTER SETUP

Apple MAC OS
1. Plug the free end of the provided USB cable into the USB port on your computer. The
microphone's blue LED will illuminate, indicating the microphone is receiving power. Your
computer will automatically recognize the USB device and install a driver.
2. To select the 670 as your audio input, rst, open your System Preferences.
3. Next, click Sound to display the Sound preference panel.
0
330
300
270
240
210
2K 5K 10K 20K
180
7
30
60
4. Click the Input tab and select the "MIC_TEST" as the device for sound input.
90
120
150
5. Click the output tab and make certain "MIC_TEST" is selected as the default output
device.(This should have happened automatically.)
8