Package Contents; Inserting The Batteries - Olymp GOsafe 5300-Serie Bedienungsanleitung

• Leaking batteries could cause damage to the device. If a battery should start to leak, remove it from the device
immediately to prevent any further damage. Take the utmost care when handling damaged or leaking batteries
and always wear protective gloves.
• Avoid any contact with the skin, eyes and mucous membranes. Rinse any parts of the body which have come
into contact with battery acid with plenty of clean water and contact a doctor immediately. Avoid extreme
conditions and temperatures which could affect the batteries, e.g. by placing them on radiators or exposing
them to direct sunlight.
• Only use batteries of the type specified.
• Never use batteries of different types or new and old batteries together.
• Ensure batteries are inserted with the correct polarity.
• If the device will not be used for a longer period, switch the device off and remove the batteries.
• Remove empty batteries from the device and dispose of them according to the applicable directives.
• The batteries must be removed from the device before its disposal.
• You are legally obliged to dispose of batteries at your dealer or at the collection points provided by the
responsible waste disposal authority.

Package Contents

Check the package contents of the safe before you actually use the safe. If anything is missing or damaged, contact
our Service Department.
• 1x Safe
• 3x Emergency keys
Setup
Open the safe for the first time / Open the safe with the emergency key:
Variant 1:
• Opening by external power supply
• Insert the batteries into the external battery box.
• Connect the external battery box to the safe interface (see "Schematic diagram of the control panel").
• Open safe with user code/fingerprint (only for 5300FP series)
Variant 2:
• Opening with emergency key
• Remove the cover of the emergency key.
• Insert the emergency key and turn the key clockwise.
• Turn the handle anticlockwise to open the door.
CAUTION: When finished, remove the emergency key and keep it in a safe place. !!!NOT IN THE SAFE!!!

Inserting the batteries

• Open the door and remove the battery cover.
• Insert 4 x AAL LR6 batteries into the battery compartment.
• Each time the batteries are inserted, the safe performs a self-test in which the display counts down from "9" to
"0" and then shows "GOOD" at the end of the self-test, which means that the batteries are inserted correctly
and the safe is working properly.
• 1x Emergency power supply
• 4x AA LR6 batteries
10
• 1x Instruction manual