Package Contents - Olymp GOsafe H20 Serie Bedienungsanleitung

Package Contents

Check the package contents of the safe before you actually use the safe. If anything is missing or damaged, contact
our Service Department.
• 1x Safe
• 2x Emergency key
Setup
Open the safe for the first time / Open the safe with the emergency key:
When opening the safe for the first time, it must be opened with the emergency key.
• Remove the cover of the emergency key (logo plate).
• Insert the emergency key.
• Turn it to open the door.
ATTENTION: Please do not leave your emergency keys in your safe.
Inserting the batteries
• Open the flap.
• Remove the battery cover.
• Insert 4xAA LR6 batteries into the battery compartment.
Low battery level
If the red light flashes after entering the correct code, it means that the battery voltage is too low and you need to
insert new batteries.
ATTENTION: Replace 4 fresh alkaline batteries by arranging them as indicated by the "+" and "-" signs.
Removing the batteries
Follow the steps below to remove the batteries.
Remove the battery compartment cover.
Caution! Danger of short circuit.
• Remove batteries only with a non-conductive object, e.g. a wooden or plastic spatula.
Remove the batteries.
Replace the battery compartment cover.
Close door with personal code
• Lock the door.
• Enter any 3- to 6-digit code and press the "LOCK" button.
• The safe is locked as soon as the display shows "CLOSED".
Open door with user code
• Enter the previous 3 to 6 digit code.
• OPENED" appears on the display.
• This means that the safe is opened.
ATTENTION: Incorrect code entry 4 times activates the self-locking function. (3-6 digit code only)
The keypad is locked for 5 minutes!
Open door with hidden user code
• Press "Clear" once before entering the password.
• As you enter the code, it disappears from the display.
• 1x Emergency power supply
• 1x Shelf
8
• 4x AA LR6 batteries
• 4x Fixing screws
• 1x Instruction manual