Operation, Storage, And Maintenance - ThermoUp Floor Bedienungsanleitung

OPERATION, STORAGE AND
MAINTENANCE, POSSIBLE FAULTS
ThermoUp heaters do not require special maintenance.
The device should be periodically cleaned with a soft cloth or
a damp sponge. Do not use abrasive detergents, pastes, metal
brushes and other hard objects.
With any heater, you should regularly check the condition and
integrity of the power cable. The lifetime of the device is more
than 10 years, if the rules on installation and operation were
followed.
OPERATION, STORAGE,
POSSIBLE FAULTS
Possible Malfunctions
There is no radiated heat
The temperature of the heated
surfaces is below the proper level
OPERATION, STORAGE AND MAINTENANCE, POSSIBLE FAULTS
The device can be operated and stored in the following
conditions:
• Room air temperature from -50°C to +70°C;
• Relative air humidity up to 80% at a temperature of +25°C;
• Store the heater in its original packaging.
The device must be protected from shock, dust and moisture.
At the expiration of the life of the device must be disposed of in
accordance with the rules, regulations and methods applicable at
the disposal site.
Remedies
• Check for line voltage and power cable integrity; if necessary, replace the
faulty cable.
• Check the position of the thermostat knob, its operation.
• Contact an authorized dealer for professional diagnostics and device repair.
• Check the temperature of the thermostat
• Check the voltage value at the heater terminals; during its operation the voltage
should be 220-230 V.
23