FLOOR HEATER
THERMOUP FLOOR AIR
Heater design
Power button
Cord socket
Power cord (1.8m)
What's Included in the set
1. Heater;
2. Electric power cord for heater;
3. Removable legs;
4. 4х screws;
5. Operating manual and warranty card.
Installation and connection
1. Unbox the device.
2. Attach the legs to ThermoUp Floor Air bottom surface with
a crosshead screwdriver.
3. Place it on the floor or any other flat surface.
4. Plug the power cord into an electrical outlet.
5. Press the heater power button to put the device
into operation.
FLOOR HEATER THERMOUP FLOOR
Figure 3. Heater ThermoUp Floor Air
The heater is equipped with removable legs, which must be
attached to the heater body with a crosshead screwdriver
and 4 screws.
Thermoelement (glass)
Aluminium base
21